Technical Specifications - Chauvet Professional RDMX Splitter 8 Kurzanleitung

EN
Panel Item
<POWER> indicator
Input <A>
Input <B>
Mode button
Signal output <1> to <8>
To use the RDMX Splitter 8 as a switch between 2 different input sources, plug the DMX Input lines
into Signal Output Ports 5 to 8. Use the Mode button to switch between sources.

Technical Specifications

Dimensions and Weight
L
ENGTH
19 in (483 mm)
Note: Dimensions in inches are rounded.
Power
P S T
OWER UPPLY
Switching (internal)
P
ARAMETER
Consumption
Operating current
P I/O
OWER
Power input connector
Power output connector
Power cord plug
Thermal
M E
AXIMUM XTERNAL
113 °F (45 °C)
DMX
D
EVICE
5-pin XLR (2 total)
Ordering
P N
RODUCT AME
RDMX Splitter 8
3
QUICK REFERENCE GUIDE
Illuminates when power has been applied to the product
DMX Input port A. Indicator light will illuminate when input signal is being received.
DMX Input port B. Indicator light will illuminate when input signal is being received.
Selects 1x8 Mode or 2x4 Mode:
• 1x8 Mode sends the DMX signal received from input port A to all 8 signal
output ports.
• 2x4 Mode sends the DMX signal received from input port A into signal
output ports 1 to 4 and from port B into signal output ports 5 to 8.
DMX Output ports 1 to 8. Indicator lights on each port will illuminate when a signal
is being output through the port.
W
IDTH
5.75 in (146 mm)
YPE
100 to 240 VAC, 50/60 Hz
120 V, 60 H
Z
11 W
0.09 A
U.S./W
Neutrik® powerCON®
Neutrik® powerCON®
T
EMPERATURE
D I
ATA NPUTS
I N
TEM AME
RDMXSPLITTER8
Function
H
EIGHT
1.77 in (45 mm)
R
ANGE
208 V, 60 H
14 W
0.06 A
ORLDWIDE
Edison (U.S.)
I C
TEM ODE
09081463
W
EIGHT
4.2 lb (1.9 kg)
V S
OLTAGE ELECTION
Auto-ranging
230 V, 50 H
Z
14 W
0.06 A
UK/E
UROPE
Neutrik® powerCON®
Neutrik® powerCON®
Local plug
C S
OOLING YSTEM
D D O
EVICE ATA UTPUTS
5-pin XLR (8 total)
UPC N
781462218119
RDMX Splitter 8 QRG Rev. 2
Z
UMBER