General Information - BELLOTA MD 350M Gebrauchsanweisung

TABLE OF CONTENTS

1. General information

2. Start up
3. Blade assembly
4. Machining
5. Special features
6. Maintenance
7. Alignment of blade
8. Technical features
1
GENERAL INFORMATION
The Table Saw specially designed for construction materials,
like granite, marble, tile, brick...
It has a 600 mm long useful straight and miter cutting.
It is robust and lightweight, and it's possible to be transportes
easily by one (with accessories) or two people.
It's designed for works with saw diamond blades
refrigerated by water. This is achieved by a closed circuit
and a water pump.
The Table Saw is supplied with all the necessary tools:
for assebling of the Saw Blade and feet, and fixing the
cutting depth.
The spare part list is enclosed.
2
START UP
The Table Saw is supplied with an electric motor, available
in two versions, single-phase 220V and three-phase 380V.
Make sure that in the work place there is a plug with the
choosen voltage.
IMPORTANT: The motor has a ground connection
(yellow/green). Do not unplug this cable, and always work
with ground connection plugged.
11
GB
11
11
12
12
12
13
13
13