Components Of The Appliance - CANGAROO X55P02AS-D Bedienungsanleitung

27. Whe the product is not being used, please, store it in a dry cool place, away
from direct heat sources, water or the reach of children.
28. The product complies with the EN60335 and EN62233 standards.
Model
X55P02AS-D
Before using the product for the first time, please, follow the listed steps:
1. Measure exactly 80 ml of water and pour it into the reservoir in the base of the sterilizer.
2. Put consequently the main sterilizer body, the tray and the lid on the top.
3. Plug the supply cord into electric power outlet and turn on the switch. The push the power button in
order to activate the process of sterilization.
4. Once the water has reached 100°C, it will convert into steam. When the water evaporates
completely, the sterilizer will automatically turn off.
5. Leave the sterilizer to cool down for about 3 minutes. Turn off the switch and unplug the supply
cord.
6. Take off the upper lid, the tray and the main body of the sterilizer and pour out the residual water.
Wipe dry the unit. Now the sterilizer is ready for use!
ATTENTION! If you do not clean the basis of the sterilizer from scale deposition every week, as
described in "GUIDELINES FOR CLEANING AND MAINTENANCE", the product will not function
normally! We recommend you to use boiled or filtered water in the device to decrease the risk from
scale deposition.
MODEL AND ACCESSORY
Accessory
Measuring cup and bottle tongs

COMPONENTS OF THE APPLIANCE

BEFORE STARTING TO USE THE PRODUCT
MANUAL INSTRUCTIONS FOR USE
Electrical specifications
AC220V/ 50HZ 600W
1. Lid
2. Tray
3. Sterilizer body
4. Power button
5. Base
6. Switch
7. Measuring cup
8. Bottle tongs
12