Survivor SRV-2 Schnellstartanleitung Seite 9

Once you have the strap threaded through both
posts, rethread the end of the strap back through the
release buckle and click that buckle into place on top
of the speaker. (The strap should not wrap around the
speaker).
Pull the straps coming out of the buckles on both ends
to tighten the strap to the speaker.
USE THE STRAP TO ATTACH YOUR SPEAKER TO
OTHER OBJECTS:
Unclick one of the buckles. Remove the release buckle
from the strap by unthreading the strap from the release
buckle. Set the release buckle aside.
Once you have disconnected the release buckle,
unthread the strap through one of the speaker's posts.
Wrap the strap around a suitable object and thread the
strap back through the exposed post.
Rethread the end of the strap back through the
removed release buckle and click that buckle into
place.
Pull the strap tight to ensure that you've properly
INDOOR/OUTDOOR SOUND MODES
5
The SRV-2 is equipped with "Indoor and Outdoor"
audio modes that are controlled by a switch located on
the back of the speaker. The indoor mode provides you
with exceptional rich Braven sound and is optimized
Survivor
for listening indoors. Switching to the outdoor mode,
and your music is boosted to carry further and louder
in outdoor settings.