Turn On & Bluetooth; Pairing With Nfc - Survivor SRV-2 Schnellstartanleitung

TURN ON & BLUETOOTH
1
To get started press the power button for 2-3 seconds. When
you release the power button you will hear the SURVIVOR
same button again for 2-3 seconds to turn your SURVIVOR off.)
In order to pair your SURVIVOR to your cell phone, tablet, or
other Bluetooth enabled source (hereafter referred to as a
®
device's instruction manual for information on activating its
Bluetooth settings).
®
PAIRING
®
on the device (see your
®
Then press and hold the play button on your SURVIVOR
until you hear the SURVIVOR pairing call.
Next go to your device's Bluetooth
"SURVIVOR SRV-2" from the list. (If asked for a passcode
enter "0000") Your SURVIVOR will remember the last 8
devices it has paired with.

PAIRING WITH NFC

If your device is NFC enabled, you can quickly pair via
the SURVIVOR SRV-2 speaker's "NFC logo". First, ensure
that NFC on your device is turned on. Then place your
settings and select
®