Hunter Basic Bedienungsanleitung Seite 12

Time Lapse
Delay
Battery Type
Other
Reset
About
Firmware is subject to change without prior notice!
Select "ON", press "OK", to set the interval; PIR sensor of
camera will be turned off; camera will shoot pics or video clips
automatically upon the interval user set.
Configurable interval: 5 seconds to 24 hours.
Note! Pls don't turn ON Time Lapse and Delay simultaneously!
Select "ON", press "OK", to set a time interval that you desire
between photos/videos upon motion. This option avoid camera
taking too many photos or videos.
Example: Camera will wait 1 minute between photo/video
recordings with motion if pre-set time interval is 00:01:00
Configurable delay time: 0 second to 24 hours.
Note! Pls don't turn ON Time Lapse and Delay simultaneously!
Alkaline/ NI-MH
Choose the correct types of batteries for the camera to perform
its best effects.
SD Cycle:
Select "ON", press "OK", camera will continue to record
photos/videos by deleting earliest photos or video clips.
Frequency:
50HZ, 60HZ; improper setting may cause camera screen flicker
Select "Yes" to reset camera back to factory default settings.
Firmware version in camera