Berger + Schröter 60432 Bedienungsanleitung Seite 10

Exchanging the replacement
1
blind rivet-gripper jaws when the
grooves are worn:
1. Release the locking ring with a pair of lo-
cking ring pliers.
2
2. Unscrew the mounting attachment and
the head of the blind rivet attachment.
3. Hold the blind rivet attachment with one
hand and pull the complete inner part out of
the other side.
3
4. Hold the inner part in position using a
mounting key and unscrew the head of the
4
blind rivet attachment using a second
mounting key.
5. Remove the blind rivet gripper jaws from
the mouthpiece and insert the new the blind
5
rivet gripper jaws into the mouthpiece.
6. Replacement blind rivet gripping jaws.
6
Now reassemble the blind rivet attach-
ment in the reverse order.
10