Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To disconnect the charger
• Tilt the charger plug downwards to remove it.
Turning the headset on and off
To turn the headset on
• Press and hold the
low tone followed by a short high tone.
The headset indicator light flashes green. If the battery
is low, the light flashes red.
Note: The first time the headset is turned on, the
headset indicator light flashes green and red,
indicating that the headset is ready for pairing.
This is the Internet version of the user's guide. © Print only for private use.
button until you hear a short
To turn the headset off
• Press and hold
until you hear a short high tone
followed by a short low tone. The headset indicator
light is switched off.
Pairing the headset
Before you can use your headset, you must pair it with
the device you want to use it with, for example, a mobile
phone. Once you have paired your headset with the
phone, you do not need to pair it again until you want
to use it with another phone.
Pairing instructions
You pair the headset with the phone by adding it to a
list of paired devices in the phone. They then recognize
each other when they connect.
To pair the headset
1. Prepare your phone according to the phone's user
documentation on pairing.
2. Press
for up to 10 seconds until the indicator
light on the headset flashes green and red. The headset
is now ready for pairing.
3. Continue according to the instructions in the phone's
user documentation. The headset passkey is 0000.
Preparing the headset
7
Werbung
Inhaltsverzeichnis
