Maintenance; Warranty; Declaration Of Conformity - Beta 1937RT Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

OPERATION MANUAL AND INSTRUCTIONS

Lubrication/Greasing

The pneumatic tool must be connected to a filter-lubricator unit provided with an air-oil microfog mixer (we recommend Beta item

1919F1/2), set at two drops per minute. This will result in a high-performing tool and wear-resistant mechanical parts.

If lubrication is not provided to the line, oil ISO 32 must be periodically poured into the pneumatic tool, through either the air supply

hole or the screw (pictures 4-f, 5-f).

MAINTENANCE

Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s

repair centre through your Beta dealer.

DISPOSAL

The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws in force

in your country.

This tool is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month

warranty for professional use or a 24-month warranty for nonprofessional use.

We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or

replacing them at our discretion.

Should assistance be required once or several times during the warranty period, the expiry date of this warranty

will remain unchanged.

This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition,

this warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent to the

customer service in pieces.

This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.



We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions

of Machine Directive 2006/42/EC and amendments thereto, as well as with the following standard:

• EN ISO 11148-8

The Technical Brochure is available at:

BETA UTENSILI S.P.A.

Via A. Volta 18

20845 Sovico (MB)

ITALY

Inhaltsverzeichnis