Function Descriptions; Remote Control; Product Use; Time Setting - Guzzanti GZ-995 Gebrauchsanleitung

FUNCTION DESCRIPTIONS

1. Remote Control

The product is equipped with remote control,use the button cell(If don't use the remote control for
a long time, please take out the battery)
Note: The buttons on the remote control, the corresponding buttons on the operation panel,
function and operation method are exactly the same,otherwise no introduction.

2. Product use

power button, and the smart key, the machine can run under the sensor intelligent induction. The
operation of the motor gear will follow sensors adjusted value. This operation can use the vast
majority of applications.
button, key selection according to wind speed motor gear, to select on or off negative ions and UV
germicidal lamp. Complete the purification function, suitable for the operating manual intervention
force purification applications.
In this mode cannot be automatically shift machine.
automatically in the purification of a machine, to ensure that no noise, will not effect your rest.
machine running time, it will run the countdown, will stop running automatically after the times out.
(If needs to cancel the timing, long press time 3 seconds to cancel this function.)
remote control can not work.(Long press 3 seconds locked to lift,or press the unlock button on the
remote control)

3. Time setting

the speed key to add 1,press the sleep button to subtract 1,set"Hour"and then click the smart key
(Press smart key back and forth for hours and wind speed. Press the wind speed and the sleep button
to add or subtract set.)
Note:
does not affect the purification.
machine is not plugged in. The battery is designed for the latest 10 days standby, it runs out of
battery for more than 10days, the clock function automatically reset. We need to set the clock again.
(Refer to the back of the clock setting process)
9