Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Daily user manual
IR Remote Control 77-920
Function
On a day-to-day basis only the fi ve white buttons should be used,
and possibly a normal switch on the wall.
The unit to be controlled can "run" with two settings.
One is known as automatic on, where the light comes on
automatically when someone walks into the room, and the other
is known as manual on, where the light must be switched on
manually using the switch.
! Note: The range of 77-920 to the sensors is approx. 3 m.
Settings
The function of the fi ve white buttons on the IR Remote is as
follows:
On
The lighting in both zones comes on.
The lighting stays on for as long as activity is registered by the
movement sensor + the cut-off time.
Off
The lighting in both zones goes off.
The lighting stays off for as long as activity is registered by the
movement sensor + the cut-off time.
Dim up
The lighting is adjusted upwards in both zones.
When you press the buttons the light starts to adjust upwards,
and when you press again the adjustment stops.
The light will remain at the defi ned level for as long as the
movement sensor registers movement + cut-off time or until you
press "Automatic"
Dim down
The lighting is dimmed down in both zones.
When you press the buttons the light starts to dim down, and
when you press again the adjustment stops.
The light will remain at the defi ned level for as long as the
movement sensor registers movement + cut-off time or until you
press "Automatic"
Servodan A/S | Tel +45 7442 4726 | Fax + 45 7442 4035 | info@servodan.dk | www.servodan.com
Lock/
App.
App.
LED
unlock
Auto
Man
On/Off
Test
Reset
On
Off
Dim
Dim
Automatic
up
down
Lx 1
Lx 1
Lx 1
Lx 1
+50
-100
+100
-50
Zone 1
Set 1
Set 1
Set 1
Set 1
-50
+50
-100
+100
Lx 2
Lx 2
Lx 2
Lx 2
-50
+50
-100
+100
Zone 2
Set 2
Set 2
Set 2
Set 2
-50
+50
-100
+100
Time
Time
Time
Time
-10
-1
+1
+10
Time
Automatic
If one of the buttons/functions described above has been
activated, you can press "Automatic" and the light will return to
daylight.
Please note that the light will come on according to the setting
selected (automatic or manual).
Glossary
Movement sensor:
Sensor that is installed in the ceiling, where it registers activity
in the room and thus keeps the light switched on.
Daylight-controlled:
When the light is daylight-controlled, the light is controlled
according to the light that comes from outside.
I.e. the light will be more dimmed on a sunny day than on a
cloudy day.
Cut-off time:
The cut-off time is the time that passes between the movement
sensor having registered its last movement until the light is
switched off.
Zones:
The room is divided into two zones.
There will typically be one zone by the windows and one zone
away from the windows.
When the light is daylight-regulated, the zone by the windows
will typically be dimmer (possibly switched off) than the other
zone.
GB
15(17)
Werbung
