Troubleshooting - Agu MFP6 Bedienungsanleitung

9
Before reusing the device for cooking, pour 100–300 ml of water into the
tank and turn on the watering heating mode for 20 minutes to remove
residual odor.
Keep the water tank dry.
water 150 ml +
citric acid 15 g
1
7
8
11

TROUBLESHOOTING

Description
Steamer mode
does not start
Blender mode does
not start
Steamer mode does
not start
60
3
2
water
100–300 ml
9
Potential causes
There is lack of water
in the tank
The blender bowl is
improperly installed
The blender bowl cover
is improperly installed
4 5
ON OFF
15 min
ON
20 min
Solutions
Fill the tank with water
Place the blender bowl
in the main unit and turn
counterclockwise until it stops.
The opening of the blender bowl
and the steam outlet must be
aligned
Install the cover on the blender
bowl and turn it counterclockwise
so that the cover locks into place
6
OFF