Scuf Infinity 1 Paddle Removal And Replacement - Scuf Gaming infinity 1 Bedienungsanleitung

D IR EC TIONS
SCUF Infinity Paddle Removal and Replacement
1
Step 1 It's recommended that you remove the paddle hatch from the
controller by holding the controller with your non-dominant hand and
placing your dominant hand thumb in the center of the paddle hatch,
apply light pressure and slide the hatch off, thus removing the hatch.
Step 2 Holding the paddle hatch in your non-dominant hand, place your
index finger of your dominant hand under the back of the paddle with
your thumb on the front of the paddle. Apply light pressure by pinching
the paddle and then lift and pull away from the paddle hatch. The paddle
should slide out with light pressure.
Step 3 To add paddles to your controller, hold the paddle hatch in your
non-dominant hand, place your index finger of your dominant hand under
the back of the paddle with your thumb on the front of the paddle. Place
the tooth of the paddle into the paddle hatch cavity. With light pressure,
push the paddle into the cavity to lock the paddle into place. You will hear
a click when the paddle is secured into the paddle hatch.
Note: The paddle includes an embossed L, C or R on the
back of the paddle to ensure correct paddle placement. Match the
letter(s) embossed on the paddle to the corresponding position on
the hatch. See diagram for clarification.
1
3
2
S CU F I NF I N I T Y
|
7
1