D IRECTI ONS
Interchangeable Infinity
1
Step 1 Place the SCUF Infinity Lock over the Infinity Ring and Thumbstick
on the controller. Line up the notches on the lock with the grooves on
the ring. The notches on the bottom of the Infinity lock will insert into the
grooves of the Infinity Ring.
Step 2 When the lock and ring are lined up, turn the lock counter
clockwise until movement stops. Pull straight up on the thumbstick to
remove both the ring and the thumbstick at the same time.
Step 3 Once the ring and thumbstick have been removed from the
controller, replace with a new thumbstick of your choice. When placing a
new thumbstick into your SCUF Infinity
on the thumbstick shaft to ensure correct placement. The thumbstick will
lock into place on the controller.
Step 4 Use your SCUF Infinity Lock to secure the ring in place by turning
the lock clockwise until movement stops.
Thumbstick Control Area
, be sure to line up the thumbstick
1
1
3
S CU F I NF I N I T Y
2
4
|
6
1