Package Contents; Hardware Overview - D-Link DGS-1008MP Installationsanleitung

Before You Begin
This Quick Installation Guide gives you step-by-
step instructions for setting up your DGS-1008MP
8-port Gigabit PoE Desktop Switch. The model
you have purchased may appear slightly different
from the one shown in the illustrations. For more
detailed information about the switch and technical
specifications, please refer to the User Manual.

Package Contents

This DGS-1008MP package should include the
following items:
• 1 x DGS-1008MP
• 1 x Power cord
• 1 x Rack mounting kit
• 1 x Quick Installation Guide
If any of the above items are damaged or missing,
please contact your local D-Link reseller.

Hardware Overview

LED Indicators
1 2
Figure 1: Front panel LEDs
# LED Status
Solid
green
Power
1
Off
2
3 4
Description
The switch is powered on.
The switch is turned off.
# LED Status
Solid Indicates the total PoE power
Amber output of the switch has exceeded
the Guard Band threshold of 118
watts, but is still below the total
budget of 125 watts.
Blinking The total PoE budget of 125 watts
PoE
2 Amber has been exceeded. When the
Max.
switch's PoE budget is being fully
utilized, no additional devices can
be powered through the switch.
Off The total PoE power consumption
is below the 118 watts Guard
Band threshold.
Solid The port is providing power to the
green connected PoE-powered device.
Blinking Indicates a PoE-powered device
Amber is connected to this PoE port,
PoE
3 but the switch has insufficient
remaining power budget to
power the device.
Off There is no PoE-powered device
connected to this port.
Solid There is an active link negotiated
green at 1000 Mbps on this port.
Blinking There is traffic on the port.
green
Link/
ACT/
4 Solid There is an active link negotiated
Speed
amber at 10/100 Mbps on this port.
Blinking There is traffic on the port.
amber
Off There is no active link on this port.
Table 1: LED overview
Front Panel Connectors
Figure 2: Front panel connectors
# Interface
10/100/1000 Mbps PoE-capable
1 Ports 1 - 8 ports, used for connecting Ethernet
devices and PoE-powered devices.
Table 2: Front connector description
Description
1
Description
DGS-1008MP