Pandora PX4 Bedienungsanleitung Seite 33

Guitar Synth parameters
Oscillator selection:
0...15 (GAIN knob)
VCF setting: 0...10.0
(TREBLE knob)
Direct level: 0...10.0
(BASS knob)
Synth level: 0...10.0
(VOLUME knob)
Threshold adjustment:
1.0...10.0 (Value dial)
The Guitar Synth is effective only when single notes are played. The desired effect will not be obtained
if chords are played.
If your instrument is not tuned correctly, the results may not be as you expect. In this case, re-tune your
instrument.
0: Sawtooth wave 2 octaves down
2: Sine wave 1 octave down
4: Sine wave
6: Sine wave 1 octave up
Oscillators 8...15 are oscillators 0...7 with portamento turned on.
Voltage Controlled Filter sensitivity adjustment
0...4.7 is sensitivity adjustment in the positive (+) direction,and 5.0...10.0
is sensitivity adjustment in the negative (-) direction.
Set this to 5.0 for a sine wave oscillator.
Adjusts the volume of the guitar.
Adjusts the volume of the synth.
Adjusts the sensitivity of the synth in response to the volume of the guitar
Adjust this as appropriate for your guitar or pickup.
1: Sawtooth wave 1 octave down
3: Sawtooth wave
5: Sawtooth wave 1 octave up
7: Sine wave 2 octaves up
33