Dell DELL10KWOLHVB Erste Schritte Seite 26

NOTE:
At initial startup, input voltage auto sensing is enabled by default. After the subsequent startup, auto
sensing is disabled until you manually enable it by using the output voltage setting.
Identifying the UPS Rear Panels
This section illustrates the rear panels of the three Dell Online Rack 10 kW UPS model options.
10 kW 208V UPS (DELL10KWOLHVUS)
UPS Communication
Bay
One NEMA
L6-30R Outlet
Two Output
Circuit Breakers
Load Segment 1 (LS1)
|
24
Installation and Startup
RS-232 USB REPO
Port Port Ports
Two IEC 320-C19
One NEMA
Outlets
L6-30R Outlet
Two Output
Circuit Breakers
EBM
Connector
Two IEC 320-C19
Outlets
Load Segment 2 (LS2)
Ground
Screw
Input Terminal
Block