Dell DELL10KWOLHVB Erste Schritte Seite 21

Removing the Terminal Block Cover
Terminal Block
Cover
Switch off utility power at the distribution point where the UPS will be connected. Be absolutely
1
sure there is no power.
Remove the terminal block cover (two screws) and retain.
2
Remove the knock-out hole in the terminal block cover for the input conduit. The hole must
3
accommodate 1" or 1.5" (25.4 mm or 38.1 mm) Intermediate Metal Conduit (IMC).
Knock-out Hole
Installation and Startup
|
19