Software-Updates; Maintenance & Troubleshooting - Master & Dynamic MA770 Bedienungsanleitung

BREAKING A STEREO PAIR
To return your speakers to single unit mode, hold down the
PAUSE button on either speaker for four seconds until the
lights on the SOURCE button quickly flash. The lights
flashing indicate that the stereo pair has been disconnected.
MULTI-ROOM AUDIO
An audio group can be created with multiple Chromecast
built-in enabled audio devices within a single WiFi network.
Use the Google Home app to create an audio group. Visit
the Google Home Support Center for further instructions.
16
SOFTWARE UPDATES
When connected to a WiFi network, your speaker will
automatically receive occasional software updates when
available. The CAST light quickly pulsing indicates that
an update is underway. Once the update is complete, the
speaker will go through the start up sequence of all four
SOURCE lights flashing during the power up period.
MAINTENANCE & TROUBLESHOOTING
• Be cautious to not touch the tweeter or woofers
• You can clean your speaker with a slightly damp
microfiber cloth. Avoid all solvents.
• Do not drop, bump or allow the speaker to be exposed to
water, moisture or extreme temperatures.
• Only use the provided 2m power cable to connect the
speaker to a power source.
• To complete a factory reset, hold down –VOL and the
SOURCE buttons for 4 seconds until the lights on the
SOURCE button quickly flash four times.
• The Google Chomecast Support Center is available
for all Cast/WiFi specific questions.
EN
17