Master & Dynamic MA770 Bedienungsanleitung Seite 7

WIFI CONNECTIVITY
To connect the speaker to a WiFi network, download the
Google Home application on your mobile device. Proceed
to follow the prompts within the application. For further
instructions, visit the Google Home Support Center. Once
the speaker is properly connected to the WiFi network, the
CAST light will remain lit.
Note: When connected to WiFi and if available,
occasional software updates will automatically download
to the speaker. When a software update is in progress
the CAST light will fast pulse. The light will continue to
quickly pulse until the download is complete; the speaker
will then restart.
If you encounter trouble while connecting the speaker to
WiFi, your router settings may interfere with Cast. Visit
the Google Chromecast Support Center to check for critical
router settings.
12
STREAM VIA CHROMECAST BUILT-IN
Once the speaker is connected to the same wireless
network as your mobile device, open your preferred
Chromecast enabled music streaming app, tap the
Cast button ( ), select the speaker as the device and
then press play.
Note: You can always Cast to the speaker regardless of the
selected source.
The Cast process is unique to each streaming application.
App specific Cast instructions can be found within the
Support section of each app's website.
For a full list of Chromecast enabled streaming services
visit www.google.com/chromecast/audio
EN
13