Hafele dialock MDU 100 Bedienungsanleitung Seite 62

5. Hold the MDU in front of the terminal at a distance of approx.
Fig. 8
6. Confirm the function selected on the MDU with the key
7. Hold the MDU in front of the terminal until it gives a visual or
8. If no other transfers from or to the terminal are required,
9. When the transfer operation is complete, the last menu
10. Stop the operation with the key
62
Dialock MDU 100 - status: 09.2013 - 732.29.197
10 cm.
audible signal. The transfer operation is now complete.
de-activate the communication mode with the key
terminal switches off automatically.
selected reappears.
If the distance between the MDU and the terminal is too
great, or any other error occurs, the following appears in
the display:
and hold the MDU closer to the terminal or hold it in a better
position.
Operating Instructions
The red LED on the terminal
flashes during the exchange of
data.
. The
, repeat the operation
.