Nobacco Todo Bedienungsanleitung Seite 7

Choosing output mode
NOBACCO Todo features two output modes: Direct Output mode and Constant Voltage Output mode.
Direct Output mode: In this mode the device's electronic board is bypassed and all the available battery's voltage and current is
provided to the atomizer. It is recommended that the particular mode is only used by experienced users who are already accustomed
with the use of mechanical mods.
Constant Voltage Output mode: In this mode the device's electronic board provides constant voltage to the atomizer. This mode
provides a smoother vaping experience than direct output mode.
In order to choose your preferred output mode, power off the device and long press the fire button to shift between direct output
mode (white light) and constant voltage output mode (orange light). Release the fire button to choose the current mode.
Battery life indication
The button light flashes to indicate the battery quantity. There are four (4) different light indications:
Stays lit: Battery is 60% - 100% charged
Slowly flashes: Battery is 30% - 59% charged
Moderately flashes: Battery is 10% - 29% charged
Flashes in frequency: Battery is 0% - 9% charged
Charging
Connect NOBACCO Todo with the supplied USB cable to a USB input or a wall adapter with USB output. The battery light flashes for five
(5) seconds when the device starts charging.
CAUTION: Power source must not exceed 1.2A/5V otherwise it may damage the battery cell or parts of the device. Warranty is void in
such an event.
DO NOT CHARGE THE DEVICE UNATTENDED
Pass though charging System
NOBACCO Todo offer pass through charging operation (charge and vape). Using pass though may affect battery's lifespan.