FabianoSteel FBM-R 48 Gebrauchsanweisung Seite 10

EN
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time by
pressing the Door Open button.
In this case:
 Microwave emission is stopped immediately.
 The timer stops automatically, indicating the
operating time that is left.
If you wish, at this time you can:
 Turn or stir the food to ensure it will be evenly
cooked.
 Alter the cooking parameters.
 Cancel the process as described below.
To restart the process, close the door.
Altering parameters
The operating parameters (operating time and
power) can be altered when the oven is operating
or when the cooking process has been interrupted
by proceeding as follows:
1. To alter the time, turn the Timer knob. The
new time defined is immediately valid.
2. To alter the power, turn the Power Selector
to a new position. The new power level will
be applied within 30 seconds.
8
Cancelling a cooking cycle
If you wish to cancel the cooking process, turn the
Timer Button to ZERO.
WARNING: When you finish using the oven,
always turn the Timer Button to zero, because
otherwise the oven will start to function when
you close the door and may be damaged if it
functions when empty.
End of a cooking cycle
At the end of the process you will hear a bell and
the Timer Button points at ZERO.
WARNING: When you finish using the oven,
always turn the Timer Button to zero, because
otherwise the oven will start to function when you
close the door and may be damaged if it functions
when empty.