Qviart unic Handbuch Seite 7

7. DiSEqC 1.1: Press the
8. Motor: Press the
9. Scan Mode: Press the
/
10. Start search: Press the
Transponder which you want to start search.
4.1.1 Antenna Settings for Satellite
Press the /▼ keys choose the satellite that you want to use.
Select
Press RED button to add a new satellite.
Add
You can select the satellite that you want to move from the
Move
satellite list by pressing the BLUE button, then input the
destination number and press OK.
Select the satellite that you want to delete from the satellite
Delete
list. Then press the GREEN button.
You can press the YELLOW button to change the satellite
Rename
name. When the keyboard popup, you can select the character
which you want to edit the name.
4.1.2 Antenna Settings for Transponder
Press the /▼ keys choose the Transponder that you want to use, and then press OK to confirm the setting.
Select
You can press the RED button to add a transponder.
Add
Select the Transponder that you want to delete from the TP list. Then press the BLUE button.
Delete
Press the keys choose the Transponder that you want to Edit, press GREEN button to edit.
Edit
/
Press the YELLOW button that you want to delete all the channels and transponders in the satellite.
Delete ALL
4.1.3 Search Channels from Satellite
1. Highlight the Satellite and press the OK button to enter satellite list.
A: Satellite Search
2. Complete the antenna settings of this satellite.
3. Highlight the Start Search and select satellite then press the OK button to confirm.
1. Highlight the Start Search and select Multi satellites then press the OK button.
B: Multi-SAT Search
2. Highlight the satellites in the satellite list, but make sure they are all configured to your DiSEqC Switch
before press the OK to mark them.
3. Press Exit will start searching programs of the satellites you have marked.
1. Highlight the Satellite and press the OK button to enter satellite list.
C: Blind Search
button to select the required DiSEqC1.1 input.
button to select DiSEqC1.2 or USALS.
/
button to select the scan mode you want to implement.
button to select Satellite & Multi-Sat & Blind scan & Transponder & Multi-
/
/
6