Using Music Player - Vertix Raptor-i Bedienungsanleitung

Upon successful connection, you may start speaking to the other Raptor-i in Full-Duplex.
EN
NOTE: Any paired Raptor-i unit can activate the Intercom function of the other paired Raptor-i units based on the command given and the current
function priority of the other paired Raptor-i units. The Intercom has "Middle" Priority. (See "MODE PRIORITY")
Disable Intercom
To disable intercom function, press and release the POWER/INT button once to disable intercom function. You should hear a long "TOO" sound.
Volume Adjustment
To adjust the volume, press and hold the VOL UP or VOL DOWN buttons until the desired volume is reached.
NOTE: When Maximum volume is reached, the speakers will produce 2 low pitched beeps.

USING MUSIC PLAYER

Play Music
Press and release the CALL CONTROL button once to start playing Music,
(the same applies if the mobile phone or GPS Sat-Nav device has music
player function). Please consult the User Manual for your music player
device as they may work differently.
Previous Track
Press and release the VOL DOWN button.
NOTE: The Raptor-i supports ONE(1) Bluetooth
another Stereo music (A2DP) player.
12
The Music Player has "Low" priority. (See "MODE PRIORITY").
Volume Adjustment
To adjust the volume, press and hold the VOL UP or VOL DOWN
buttons until the desired volume is reached.
NOTE: When Maximum volume is reached, the speakers will produce
2 low pitched beeps.
Next Track
Press and release the VOL UP button.
®
Stereo (A2DP) player. If your mobile phone is also used as your music player, you CANNOT connect