imacon Flextight Photo Anwenderhandbuch Seite 14

Hardware ReferenceÑFlextight Photo
12
Setting up the Scanner
7. Connect the round connector from your power supply to the round
socket on the back of the scanner.
8. IMPORTANT: Make sure that the wall socket you are planning to
use meets the electrical requirements outlined above.
Plug the Flextight Photo power supply into a wall socket. Note that
the power supply may emit a low buzzing sound when plugged in.
This is normal and will not damage the power supply or scanner.
9. Turn the scanner around so that the side with the red button is fac-
ing you as you sit at your computer.
10. Press the red power button on the front of the scanner to turn it on.
11. Your system is assembled. Turn on your computer and install the
ColorFlex image scanning software.
Imacon Flextight Photo UserÕs Guide