Pairing The Headset; Pairing The Headset To A Mobile Phone; Pairing To Other Bluetooth Devices - Sennheiser VMX OFFICE Bedienungsanleitung

Pairing the headset

Upon delivery, the headset and the base
station are already paired. You can pair
the headset to:
• a mobile phone
• or a similar device with a Bluetooth
"handsfree" or "headset" profile.
Pairing means forming a pair
of devices by establishing a
trusted relationship. This has
to be done only once.
Connecting
ing a certain Bluetooth con-
nection to the paired device.
This is done each time you
make or receive a call.
Once you have paired and connected to
a Bluetooth device, the headset will
remember this setting and automati-
cally try to connect to the last used
device every time you open the boom
arm.
• If last connected to a base station, the
headset will try to connect to a base
station when the boom arm is opened
the next time.
• After a firmware update, the headset
will automatically connect to a base
station.
2)
EU Directive 2003/10/EC on the minimum
health and safety requirements regarding
the exposure of workers to the risks arising
from physical agents (noise).
12
means establish-

Pairing the headset to a mobile phone

Make sure that the headset is
switched on and placed close to the
mobile phone.
Press and hold the volume up
button and then open the micro-
phone boom
The headset LED
nately in red and blue, indicating that
the headset is in pairing mode.
On the mobile phone, start a search
for Bluetooth devices (see the
manual of your mobile phone) and
follow any instructions displayed on
the mobile phone display.
Once the headset is detected by the
mobile phone, select "VMX".
When the Bluetooth connection is
successfully established, the headset
is identified as "VMX OFFICE" on the
mobile phone display.
When the mobile phone prompts a
keyword, enter four zeros (0000).
If pairing was successful, the headset
LED flashes slowly in blue.
Once paired, the mobile phone is able to
transfer the call audio to the headset –
either automatically or manually (please
see the mobile phone manual whether
the call audio is transferred automati-
cally or manually). Most mobile phones
show a headset symbol in their display,
if successfully connected.

Pairing to other Bluetooth devices

If you wish to pair the headset to other
Bluetooth devices, please refer to the
manual of the Bluetooth audio device.
.
flashes alter-