Power; Auto Standby; Power Supply; Standby Function - THOMSON RCD210U/BT Bedienungsanleitung

Power

• Risk of product damager! Make sure that the power voltage corresponds to the
voltage printed on the back label.
• Risk of electric shock! When you unplug the AC power cord always pull the plug
from the socket. Never pull the cord
CAUTION • Before connecting the AC power cord, ensure you have completed all other
connections

Auto standby

When no music play from a connected device, the product automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Battery power:
Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove
the batteries when appliance will not be used for a long period of time, as this will cause leakage to
the batteries and subsequently damage to your set.
Use batteries of the same type. Never use different types of batteries together.
Do not throw the battery into the fire, or exposed to sunshine or the like.
If the liquid contained in the batteries comes in contact with eyes or skin, wash the area immediately
and carefully with clear water and consult a doctor

POWER SUPPLY

DC power supply
Batteries (not included)
Open the battery compartment and insert 8 size "C" Cells (preferably alkaline) with the correct
polarity as indicated by the "+" and "–" symbols inside the compartment.
Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause
the batteries to burst. Therefore:
• Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the
device.
• When inserting new batteries, do not mix old batteries with the new ones.
• Remove the batteries if the device is not to be used for a long time.
Device power supply (mains AC 230V/50Hz)
1. Check if the power voltage, as shown on the identification plate on the bottom of the device,
corresponds to your local AC power supply.
2. Connect the power cord to the AC MAINS inlet and the wall outlet. The power supply is now
connected and ready for use.
3. To switch off completely, unplug the power cord from the wall outlet.
Note: the battery is disconnected once the AC/DC 9V adaptor is plugged into the device.

STANDBY FUNCTION

Switching to STANDBY to save energy.
1. Press the POWER button to turn off the device.
2. The display is blank and this indicates that the device is off.
3. Whether you are using mains or battery supply, always switch the device to STANDBY mode to
avoid unnecessary energy consumption.
Note: In CD, USB & AUX mode, the device will automatically switch off if the main function is inactive
for more than 15 minutes. For example, if music has finished playing and is stopped for more than 15
minutes, the device will switch to standby mode to save energy, as required by ERP II.
- EN 4 -