Installation, Electrical; Environmental Protection; Product Information - Maico EAQ 10/3 Montage- Und Betriebsanleitung

gb | 2. Environmental protection
avoid the risks associated
with this work.
●
Before removing the cover,
disconnect the unit from the
power supply (switch off
mains fuse).
●

Installation, electrical

connections, commissioning
and repairs only permitted
when carried out by trained
specialists.
●
You are considered a trained electrician
if your specialist training and experience
means that you are familiar with
o
the relevant standards and
guidelines,
enables you to correctly and safely
o
undertake the electrical
connections in accordance with the
wiring diagram in the installation
instructions,
enables you to recognise and avoid
o
risks and hazards associated with
electricity and
you are able to recognise and
o
avoid risks resulting from incorrect
installations and settings and the
resultant hazards.
●
Only connect unit to a
permanently wired electrical
installation (see chapter 5,
Electrical connection).
●
The unit may only be
operated using the voltage
and frequency shown on the
rating plate.
8
●
Only operate the unit when it
is completely installed.
●
Modifications and alterations
to the unit are not permitted
and release Maico from any
guarantee obligations and
liability.
Intended use
Air quality controller for controlling fresh
air supply, dependant on the room air
quality.
●
Only for use in living areas.
Predictable misuse
The unit should not be used:
●
Close to flammable materials, liquids or
gasses.
●
In areas subject to explosion hazards.
●
For safety applications.
●
Near silicones and polysiloxanes
●
In surroundings where the sensitive
layer comes into contact with liquids.

2. Environmental protection

The unit and the packaging contain parts
that can be recycled, and should not end
up in the domestic waste. Unpack the unit.
Please dispose of the packaging material
in an environmentally-friendly way in
compliance with the regulations valid in the
country where you are.

3. Product information

Product description
Air quality controller sensor for controlling
the ventilation unit depending on the air
quality. The integrated air quality sensor is