Before Use - SOLAC TE7800 Gebrauchsanleitung

place with new batteries.
Note: When changing the batter-
•
ies, the configuration of the appli-
ance will be removed, and you will
need to reset the parameters of the
appliance.
INSTRUCTIONS FOR USE

BEFORE USE:

Remove the appliance's protective
•
film.
Make sure that all the product's
•
packaging has been removed.
Prepare the appliance according to
•
the function you wish to use.
SETTING DATE, TIME, UNIT OF
PRESSURE AND MEMORY:
Press button (4)
•
The year digit will begin to flash.
•
Press the memory button (3) or
[▲] or [▼] to select the corre-
sponding year.
Next, press button (4) again and
•
change the month using the mem-
ory button (3) or [▲] or [▼] .
Now press button (4) to change the
•
day by using the memory button
(3) or [▲] or [▼] .
Next press button (4) to change the
•
hour by pressing the memory but-
ton (3) or [▲] or [▼] .
Now press button (4) to change the
•
minutes by pressing the memory
button (3) or [▲] or [▼] .
Next press button (4) to change
•
the unit of pressure by pressing the
memory button (3) or [▲] or [▼] .
Complete setting, press [ON/OFF].
•
button (2) to exit.
To change from memory ( ) to 2 (
•
), with the machine off press and
hold the On/Off button until one of
the two memories appears (14),
once selected press the On/ Off
button again and it will switch off.
USING THE
(WRIST):
Uncover your forearm and do up
•
the wristband so that the visor is on
the inner part of the forearm 1cm
from the palm of your hand. Make
EN
TE7800 MODEL