USRobotics USR805436A Installationsanleitung Seite 10

English
1. Unplug the power adapter from the print server.
2. Press and hold the
3. Plug the power adapter back in to the print server.
4. Release the
RESET
I am unable to add my printer in Add Printer Wizard.
S o l u t i o n :
Your printer may not be compatible with the Wireless USB Print Server. Close all
the print server setup screens and disconnect the printer from the print server.
1. Install the printer on your computer according to the printer manufacturer's
instructions.
2. When finished, reconnect the printer to the print server.
3. Click Windows
.
Setup
4. Follow the on-screen instructions to complete the installation.
I am unable to print a test page.
S o l u t i o n :
1. Windows XP, 2000, and NT Users:
o
Click Windows
Windows Me, 98, and 95 Users:
1) Click Windows
2) Within Control Panel, click
2. Right-click the printer you just installed, select
tab.
Ports
3. Make sure the print server port is selected. If it is not, select it, click
and then click
I am unable to print via a wireless connection or the Wireless
USB Print Server is not connecting to my wireless network.
S o l u t i o n 1 :
Make sure you have the SSID and security information that match the settings of
the wireless router in your network. If any of this information doesn't match, you
will not be able to connect to the wireless network. You will need to reconnect
the print server to your router using an Ethernet cable in order to make any con-
figuration changes.
S o l u t i o n 2 :
Make sure your router or access point is using only WEP or WPA-PSK with
TKIP for security. These are the only two types of security that the Wireless USB
Print Server supports.
6
button.
RESET
button.
>
Start Programs
>
Start Printers and Faxes
>
Start Settings
. You should now be able to print a test page.
OK
>
U.S. Robotics Print Server
.
>
Control Panel
Printers and Faxes
Properties
>
Print Driver
.
.
, and then click the
Apply
,