Maintenance - Oster 078006 Bedienungsanleitung

To clean the blades, plug clipper into electrical outlet and turn on.
In a shallow pan, immerse blade teeth into Oster™ Blade Wash™
cleaning solution.
Caution: DO NOT IMMERSE
THE CLIPPER.
Remove blade from cleaning solution
and while holding clipper blade end
down, wipe the blades with a dry,
clean cloth.
If after cleaning, you find that the
blades still do not cut properly, it is
possible that a few fine pieces of hair
are still trapped between the blades.
If this occurs, remove the blade.
Without loosening the tension springs screws, slide the upper blade
to one side but not completely out from under the tension spring.
Wipe the surface between the blades clean with a dry cloth.
Place a drop of oil on the mating surfaces and in the tension spring
guide slot. Slide upper blade to the other side and repeat process u .
AVAILABLE OSTER™ CLEANERS
Regular use of the following products will help you enjoy optimum performance from your clipper and prolong its functionality.
NAME
Kool Lube™
Blade Wash™ Cleaning Solution
Clipper & Blade Lube™ Oil
Waste Disposal
This marking indicates that this product should not be disposed with other household waste throughout the EU. To
WARNING
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
When using or cleaning this clipper, do not use any non Oster™ approved aerosol sprays or blade
washes, especially those containing methylene chloride, dimethyl benzyl ammonium chloride, or 1-1-1
trichloroethylene.Damage caused by these chemicals will void your warranty. You may use Oster™ Blade
Wash™ cleaner and Oster™ Blade Lube™ oil, which do not harm the product.

MAINTENANCE

AND LUBRICANTS
PART NUMBER DESCRIPTION
2112-01 Lubricates and cools down blade.
076300-103 Flushes away accumulated hair and removes dirt buildup trapped between
upper blades.
076300-104 Lubricates between upper and lower blades to keep them sharper longer and
produce a smoother clipping action.
English-3
Slide the upper blade back into position and reassemble the clipper.
With the clipper running, lubricate the blades with a light coat of
Oster™ Kool-Lube™ lubricant or
a drop or two of Oster™ Premium
Lubricating Oil.
Sharpening
Oster™ cutting blades are of
individual hollow-ground design,
hardened to extend cutting life.
As with any cutting tool, the
cutting edges will become dull
after extensive use. If sharpening
is necessary, send blades to
an Oster™ Authorized Service
Center.
Storing Your Clipper
Store your clipper in a clean, dry space. Be careful not to tangle the
cord while storing the clipper. Do not wrap cord around the clipper
when storing. This can damage the cord insulation.