Block Diagram; Specifications - Fender RUMBLE 150 Bedienungsanleitung

Vorschau ausblenden

Seite von 34

/ 34
Lesezeichen

Verfügbare Sprachen

Rumble bass amplifiers are equipped with Fender's Delta-

Comp limiter to minimize power amp distortion and increase

sustain.

Setting the VOLUME control to higher settings

or playing aggressively with hotter basses may result in a

Rumble bass amplifiers are equipped with variable speed fan

cooling and thermal shutdown protection. The fan will start

at a low speed and increase as you play harder. Leave at least

6 inches of clearance between the vents on your amplifier

and other objects. If the amplifier vents are blocked, or it

is used in an extremely hot environment, it may overheat

and shut down causing a temporary mute of the speaker

while the power LED indicator remains on. Under the most

MODEL:

Rumble 150

POWER REQUIREMENT:

400W Max / 200W Typical

INPUT IMPEDANCES:

1MΩ (Input) / 10kΩ (Aux In)

INPUT SENSITIVITY:

40mVrms (Input) / 300mVrms (Aux In, both channels driven)

(For full power at 100Hz, with Volume at "10", and tone controls at "0")

TONE CONTROLS:

BASS: ±15dB @ 80Hz

LOW-MID: ±12dB @ 400Hz

HIGH-MID: ±12dB @ 1.2kHz

TREBLE: ±15dB @ 10kHz

SHAPE FILTER:

PUNCH: +7dB @ 170Hz, –12dB @ 50Hz

SCOOP: +2dB @ 125Hz, –13dB @ 650Hz, +2.5dB @ 8kHz

FX LOOP IMPEDANCES:

SEND: 1kΩ (balanced)

RETURN: 18kΩ (balanced)

LINE OUT:

OUTPUT IMPEDANCE: 3.3kΩ (balanced)

MAXIMUM OUTPUT: +8.75dBU (into 600Ω)

POWER AMP OUTPUT:

160W into 4Ω @ <0.1% THD, 100Hz

HEADPHONE OUTPUT:

280mW into 32Ω/Channel

SPEAKERS:

One 15" Special Design - 4Ω,

Piezo Tweeter

Specifications are subject to change without notice. Visit www.fender.com for additional product information.

Delta-Comp™ Limiter

Thermal Performance & Protection

Block Diagram

Specifications

fender.com

heavily compressed sound with increased sustain. Using the

–6dB switch or setting the VOLUME control lower will provide

a less compressed sound with more dynamic range and

increased touch-sensitivity.

extreme operating conditions it may be possible for the

thermal shutdown to disrupt the amplifier power supply

and the speaker will mute and the power LED indicator will

turn off. If any shutdown (speaker muting) occurs, leave the

power switch ON (to keep the fan running), and allow the

amplifier several minutes to cool down. The amplifier will

automatically resume operation when it has returned to a

safe operating temperature.

Rumble 350

950W Max / 450W Typical