Troubleshooting Guide For Splitters; Check List - digitalzone 208L Handbuch

NEXD HDMI Splitter

Troubleshooting Guide for Splitters

- Please check the following before contacting the Customer Center for service.
Status: When the TV screen does not show anything or is blinking

Check List

Is the product connected to
the HDMI Cable properly?
Is the LED for "POWER,
SYNC, DVI/HDMI, INPUT,
EE LED" on the front blinking
or off?
Is the adapter enclosed with
the product supplied by
DIGITALZONE?
Are the video source
equipments (Generator and
Blu-Ray) turned on?
Has the Input number been
selected properly?
Are you displaying the Full
HD TV and the HD TV
together?
When additionally connecting or removing a TV to or from a splitter, the TV screen may blink for a
※
few seconds and then become normal due to the initialization of EDID. (This is not an error but a
normal operation.)
14
1) Connect the product to the cable correctly.
2) Replace the cable and connect the new one.
1) Check if the power adapter is connected properly.
2) Press the "Power" button on the front.
3) Check if the AC power is connected properly.
4) Replace the adapter.
1) Use an adapter supplied by DIGITALZONE only.
1) Directly connect the video source equipments (Generator and
Blu-Ray) to the TV to see if they work normally.
1) Select "Input1" for one video source.
2) If "Input2" is selected, press the "Input2" button on the front.
1) Please change the resolution of source player(HD stream
generator or Blu-ray player) to lower resolution.
2) Please change F Mode of HDMI splitter to "F1".
Measures