How To Use Edid Emulation Mode; Dynamic Mode - digitalzone 208L Handbuch

NEXD HDMI Splitter

How to use EDID Emulation Mode

1. Dynamic mode

Function
Number
F1 Normal
F2 Copy
How to set Dynamic mode.
1. Keep touching "F" key on front over 2sec.
2. All LEDs of input1~2 are blinking after pre-registered mode LED blinking.
3. Select No. 1~2.
4. No.1->F1 No.2->F2
5. Selected LED function Number (input1~input2) is blinking and be set. .
12
Mode Summary
Safety
configuration
1st HDMI Port
Description
Intersection of all those display
devices
Follow EDID information of the display
device connected 1
st
HDMI output.