Cavitron ® 25K ™ Ultrasonic Inserts; Foot Control Information & Operation - DENTSPLY BOBCAT Pro Gebrauchsanleitung

6.4 Cavitron ® 25K ™ Ultrasonic Inserts
The many styles of Cavitron ® 25K TM Inserts are easily interchangeable for various procedures and applications.
See enclosed booklet for specific information.
Insert Tip
Shape and size of tip
determines access and
adaptation. Preheated
water directed to tip.
Hold the handpiece in an upright position. Activate the foot control to bleed with water any air bubbles that might be trapped
inside the handpiece. Lubricate the rubber o-ring on the insert with water before placing it into the handpiece. Fully seat insert
with a gentle push-twist motion. DO NOT FORCE.
6.5 Foot Control Information & Operation
The following operating characteristics apply when using your Cavitron BOBCAT Pro Ultrasonic Scaler with Cavitron
Ultrasonic Scaling Inserts and the PEC-2 Endosonic Insert.
Foot Control
depressed...
The ultrasonic insert tip is
activated and irrigating water.
Section 6: BOBCAT ® Pro Ultrasonic Scaler Description cont'd
O-Ring
Provides seal for handpiece coolant.
O-Ring should be replaced when worn.
Finger Grip
Insert Marking
Manufacturer, Date (YYMM),
Frequency, Insert Type. Tip Shape,
Tip Lot Number (if applicable)
e.g. DENTSPLY 9608 25K FSI-SLI-10S
Foot Control
released...
Both ultrasonic activation
and irrigating flow stop.
Connecting Body
Transfers and amplifies mechanical
motion of stack to insert tip.
Magnetostrictive Stack
Converts energy provided by
the handpiece into mechanical
oscillations used to activate
the ultrasonic insert tip.
ENGLISH • 7