Zero Adjustment; Reference Measuring - LIMIT 6200 Bedienungsanleitung

4. This moisture scanner reacts to metal in the same
way as on humidity. In case there is a nail, armouring
or another metal object to be found inside or near the
material to be examined close to the measuring fi eld
(plate on back side of device) the readout value will
be too high and cannot be used.
5. The moisture scanner 6200 is not a high-precision
measuring device. We shall not assume any liability
for potential damage resulting from incorrect use of
the device or from the fact, that the scanner has been
used as a measuring instrument. For more accurate
measurements of wood and building material it is
recommended to use instruments with selectable
material groups.
6. Handle the device carefully and use in accordance
with mentioned specifi cations only.

ZERO ADJUSTMENT

The scanner is always set to zero after switching on and
displays the measured value when the bottom sensor of
the device touches the material.
1. Keep hands away from the bottom sensor.
2. Pay attention to dry hands when using the scanner.

REFERENCE MEASURING

First fi nd a dry area on a material and use it as a reference
value, moisture rating - dry.
Now you can quickly detect higher humidity or leaks
as the measured value increases, either by moving
the device over this surface, or making point to point
measurements.
Moisture indicator, pinless
7
User guide
ENG