Phase Mode; Quick Phase Shift - SKF TKRS 11 Bedienungsanleitung

4.2 Phase mode

The phase mode allows to rotate the frozen image while keeping the same
lash rate.
Changing the phase is very helpful for inspections as all parts of the machine
can be inspected without changing the lash rate.
Rotating the wheel (button 3) changes the phase.
Fig. 5 – Phase mode

4.3 Quick phase shift

The buttons 1 and 2 can be used to quickly change the phase by + / - 45°.
12 EN
Phase Phase
45° 45° 45° 45°
mode mode
Adjust phase by
scrolling the wheel
Fast steps of phase adjustment
+ or – 45 degrees