Winter Use; Light Signals; Maintenance; Cleaning The Ash Container - Cinderella MOTION Bedienungsanleitung

WINTER USE

In the event that the unit will be used in an area where snow is likely to build up on the roof of the
motor home/caravan, use the exhaust extension provided. This will ensure that he exhaust does not
get blocked with snow, which would reduce air circulation and impair combustion.

LIGHT SIGNALS

There are three lights on the control panel: red, yellow and green. When one of these lights is on, it
either indicates which operating mode the toilet is in or highlights an error (see separate section about
troubleshooting).
Red light
LIGHT TYPE LIGHT SIGNAL
Green light Light stays on
Yellow light Light stays on
Red light Flashing
Red and yellow light Flashing
8
Yellow light Green light
STATUS
Combustion in progress. Combustion will
stop if the toilet lid is lifted, and the toilet is
then ready for use.
Toilet lid is open.
It is recommended that you empty the ash
container.

MAINTENANCE

Cinderella operates in an extreme environment, with high temperatures, acids and exhaust fumes.
This results in the need for preventive maintenance of the ash container, pipes, fan and catalytic
converter. It is recommended that you use an authorised caravan workshop to carry out maintenance
in connection with regular servicing of the caravan/motor home.
HOWEVER, YOU SHOULD CARRY OUT CERTAIN MAINTENANCE YOURSELF:

CLEANING THE ASH CONTAINER

NB!
• The ash container must only be emptied and cleaned when it has cooled down sufficiently.
• Do not use detergents containing chlorine as this can corrode the insert and damage the catalytic
converter.
To be carried out every time you empty the ash container (see description on page 7).
1. Remove the ash container.
2. Remove the insert from the ash container and empty out the ash.
3. Pour warm water into the insert to dissolve burnt-on residue and urine salts. Leave the water to
stand for 15–30 min.
4. Pour out the water and brush off any residue from the insert. Do not scrape with any metal items
as this can damage the surface.

CLEANING THE BOWL

NB!
• The toilet must have cooled down.
• Do not use detergents containing chlorine.
• Do not use any utensils that could scratch the metal surface on the bowl.
To be carried out as needed or after every third time the
ash container is emptied.
1. Open the toilet lid. Press and hold down the start button
until the hatch to the bowl opens.
2. The hatch to the bowl will remain open until the toilet lid
is closed again. A safety function ensures that the hatch
can only be placed in the open position when the toilet has
cooled down sufficiently.
3. Clean the bowl with a soft cloth (Illustration 8).
Alternatively, you can use paper towels and then drop
them into the combustion chamber after cleaning. Then
close the toilet lid. The hatch to the combustion chamber
will then close.
Illustration 8
9