Technical Specifications - Status Js550 Originalbetriebsanleitung

4. TECHNICAL SPECIFICATIONS

DUST EXTRACTION
The jigsaw is delivered with a dust extraction adapter (9), fitted to the tool body.
The dust extraction adapter facilitates air suction around the blade, thus extracting
the dust and chips from the cutting line to improve operator's scope of vision.
TO INSTALL:
• Unplug the saw.
WARNING: Failure to unplug the saw may result in accidental starting and
possible serious injury.
• Attach the dust extraction adapter to the tool body.
• Connect the dust extraction adapter to a dust collection system or a vacuum
cleaner.
TO REMOVE:
• Unplug the saw.
WARNING: Failure to unplug the saw may result in accidental starting and
possible serious injury.
• Draw out and remove the adapter.
PARALLEL GUIDE
The jigsaw is delivered with a parallel guide (11), which is a convenient device for
making crosscuts and rip cuts.
TO INSTALL:
• Unplug the saw.
WARNING: Failure to unplug the saw may result in accidental starting and
possible serious injury.
• Insert the parallel guide arm through the two slots in the base plate.
• Adjust the parallel guide to the desired distance from the edge of material and fix
it by the screws (12).
TECHNICAL SPECIFICATIONS
Model:
Voltage/frequency
Power input
No load speed
Stroke length
Speed setting
Blade type
Max cutting capacity:
wood
metal
Pendulum setting
Bevel adjustment
Weight (EPTA Procedure 01/2003)
Safety class (EN 60745)
Included accessories: Parallel guide, spanner, dust outlet, blade.
EN
JS550
230V~50HZ
570 W
800 - 3000/min
19mm
65mm
6mm
0-45°
1,9kg
10
4. TECHNICAL SPECIFICATIONS
Noise and vibration information
Noise emission (measured values determined according to EN 60745):
A-weighted sound pressure level LpA
Uncertainty КpA
A-weighted sound power level LwA
Uncertainty КwA
Wear hearing protection!
Vibration emission
Total vibration values (vector sum in the three axes)
determined according to EN 60745
Vibration emission value ah
Uncertainty K
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working
period.
Maintain the power tool and the accessories and keep your hands warm during
operation to reduce the harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals
and metal may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust
especially in conjunction with additives for wood conditioning (chromate, wood
preservative). Material containing asbestos must only be treated by specialists.
• Where the use of a dust extraction device is possible it shall be used.
6
• To achieve a high level of dust collection, use vacuum cleaner for wood or for
T
wood and/or minerals together with this tool.
• The work place must be well ventilated.
• The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
4
II
80.9 dB(A)
3.0 dB
91.9 dB(A)
4,351 m/s²
1.5 m/s²
EN
11
3.0 dB