Turning The Camera On And Off; Taking Photos - LEXIBOOK DJ030series Bedienungsanleitung

2. Click "Install Driver", and then follow the instructions to install the camera
driver.
3. You will need to reboot your computer after the driver installation. The
"MegaCam" driver allows you to use your digital camera as a webcam.
Note:
- If the CD does not auto run, click "Start", "Run", then type in "D:\autorun.
exe" in the Run dialog text box (where D:\ is your CD-ROM drive) and press
Enter.
- You must install the driver before downloading pictures/videos from the
camera or using it as a webcam.
- Make sure the camera is not connected to your computer before installing
the driver and the software.
- When launching the "PhoTags Express" software for the first time, a
registration dialog box is displayed on-screen. You can choose to register
the program, skip the registration process or to stop displaying this dialog
box again.

TURNING THE CAMERA ON AND OFF

NOTE: Before using this product for the first time, remove the static label
from the LCD screen.
1. Press the Power/Menu button (8) for about 3 seconds to turn the camera
on. The LED will light up for a moment and the camera will sound a beep to
confirm that it is ready for use.
2. Press and hold the Power/Menu button (8) for about 3 seconds again to
turn it off.
Note: The camera will auto power off after 60 seconds of inactivity.

TAKING PHOTOS

You are already in camera mode when you switch on the unit:
1. Press the Shutter button (2) to take a photo. The camera will beep twice
to confirm that a picture is taken. The number of pictures stored in memory is
shown on the LCD screen.
2. To check the number of pictures you took or the battery level, press the
Power/Menu button (8) once in camera mode. Press the Power/Menu
button (8) again or wait a few seconds to go back automatically to the
camera mode.
Note:
• When the camera's built-in memory is full, if you try to take a photo, the
LCD screen will display a warning message.
• When the SD card inserted in the camera is full, if you try to take a photo,
the camera will beep twice. Make sure you transfer your photos to your
computer.
1
DJ030seriesIM0109.indd 13 16/3/09 10:45:27