Printer Parts - Epson TM-U200 Series Bedienungsanleitung

Printer Parts

1
Type A
DIP Switch Tables
Serial
SW Function
1-1 Data reception
error
1-2 Receive buffer
capacity
1-3 Handshaking
1-4 Word length
1-5 Parity check
1-6 Parity selection
1-7 Baud rate
1-8 Busy condition
2-1 Print column
selection
7 × 9 font/
9 × 9 font
2-2 For internal use. Do not change.
2-3 Type A For internal use. Do not change.
Types B & D Pin 6
reset signal
2-4 Type A Undefind.
Types B & D Pin 25
reset signal
2-5, For internal use. Do not change.
2-6
2-7 Type A Pin 6 reset
signal
Types B & D For internal use. Do not change
2-8 Type A Pin 25
reset signal
Types B & D Undefined.
2
Type B and
two color
Type D
ON OFF
Ignored Prints"?"
40 bytes ANK Model:
1000 bytes
Multilingual
model: 512 bytes
XON/XOFF DTR/DSR
7 bits 8 bits
Yes No
Even Odd
4800 bps 9600 bps
BUSY when BUSY when
receive offline or receive
buffer is full buffer full
42/35 40/33
Enabled Disabled
Enabled Disabled
Enabled Disabled
Enabled Disabled
3
Single
color
Type D
Parallel
SW Function
1-1 Auto line feed
1-2 Receive buffer
capacity
1-3- Undefined
1-7
1-8 Busy condition
2-1 Print column
selection
7 × 9 font/
9 × 9 font
2-2 Internal use. Do not change.
2-3 Type A Internal use. Do not change.
Types B & D Defined.
2-4 Type A Undefined.
Types B & D Pin
31 reset signal
2-5, For internal use. Do not change.
2-6
2-7 Type A Undefined.
Types B & D Internal use. Do not change.
2-8 Type A Pin 31
reset signal
Types B & D Undefined.
ON OFF
Enabled Disabled
40 bytes ANK Model:
1000 bytes
Multilingual
model: 512 bytes
BUSY when BUSY when offline
receive or receive buffer
buffer is full full
42/35 40/33
Enabled Disabled
Enabled Disabled