Aukey CP-T06 Bedienungsanleitung Seite 9

Using the Short Center Column for Low-Angle Shooting
For low-angle shooting, use the short center column instead of the long one and adjust the tripod legs
to the widest angle (80°) locking position.
1. Unscrew and remove the ball head (if installed) and the bottom end of the center column with the
retractable weight hook
2. Turn the center column extension collar to the right to loosen, and lift the center column out
3. Insert the short center column
4. Adjust to the desired position and tighten the collar so the center column is fixed securely
5. Screw the ball head and end of the column back on again if desired
Using the Ball Head
Ball Joint Knob: The biggest ball head knob releases the ball joint. Turn counterclockwise so the ball
head joint is free to tilt and rotate (when you feel resistance, don't attempt to unscrew further). The
large notch at the side allows greater downward tilt. Turn the knob clockwise to lock the ball joint
(don't over-tighten)
Pan Knob: The smallest knob releases the ball head at its base for 360° panning. Slightly turn it
counterclockwise to allow panning. Turn it clockwise to lock again
- 07 -