Aukey CP-T06 Bedienungsanleitung Seite 10

Drag Control Knob: This knob increases and decreases resistance (friction) on the ball joint to more finely
adjust the smoothness and speed of its movement. Slightly turn the ball head knob counterclockwise
to release the ball joint and turn the drag control knob counterclockwise to further loosen it. Use further
small adjustments of the two knobs together in either direction to get the desired resistance and
control with the ball joint
Quick Release Knob: The knob on the side of the mounting platform releases the quick release plate
(and any attached camera). Turn the knob counterclockwise far enough to take the quick release
plate out. Carefully hold your camera while loosening the knob and removing the camera. The
package includes an extra quick release plate for convenient switching between two cameras
Camera Mounting Without the Ball Head
1. Remove the ball head to reveal the 3/8" standard screw head in the center column
2. Unscrew the screw plate on the center column, lift the plate and screw off, then remove the screw
and reinsert upside down in the screw plate hole so the 1/4" screw head faces upwards
3. Screw the plate (with screw) back onto the center column
- 08 -