General Power Tool Safety Warnings; Electrical Safety - Rebel RB-1010 Bedienungsanleitung

Disconnect power tool from its power source before maintenance, cleaning or any
intervention on product; or when you do not use product.
Disconnect battery charger power cord if cord or extension cord is damaged or cut
during operation. Unplug charger by pulling the plug. Do not pull the cord.
Do not dispose of the product in unsuitable containers.
Separate collection for Li-Ion battery.
The product is in accordance with the applicable safety standards in the
European directives.
Explosion hazard! Protect battery against heat and fire.
Do not throw the battery into fire. Do not burn.
Do not throw the battery into water.
Maximum ambient temperature: 40°C/45°C.
Always charge the battery in ambient temperature between +10°C to +40°C.

General power tool safety warnings

1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
3. Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
Never allow children to operate the power tool.
Children should be supervised to ensure that they do not play with the power tool.

Electrical safety

Before connecting the power tool to power supply socket, make sure the voltage
indicated on the power tool corresponds to the voltage in the power supply socket.
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
29 EN