Getting Started - nedis SPVC7000BK Schnellstartanleitung

Getting started

1. Mode Button
2. Vol+
3. Vol-
4. Mute Microphone
5. Play & Pause
6. Push to talk
7. Power
8. Reset
9. Micro USB Port
10. LED indicator
Turning on the device
• Connect the speaker to a power socket with the included USB power cable and
a suitable USB power adapter (5 V / 1 A).
• Turn on the speaker by pressing the power button.
Setting up the device (Wi-Fi mode)
• Download the Nedis® SmartVoice app from the iTunes App Store or
Google Play Store.
• Connect your mobile device to a Wi-Fi network.
Note: The SPVC7000 does not support 5 GHz networks; make sure to connect
with a 2.4 GHz network.
• Check the LED indicator to ensure that the speaker is in Wi-Fi pairing mode.
• Open the Nedis® SmartVoice app you just installed.
• Tap "Configure" in the app and follow the instructions to set up your speaker.
Switch between Wi-Fi and Bluetooth® by pressing the button
Short press to increase the volume.
Short press to decrease the volume.
Short press to mute the microphone.
Play or Pause the music playback under Bluetooth mode.
Wake up the speaker and talk to Amazon Alexa.
Short press to power On/Off.
Press to reset factory default setting.
Connect USB cable to charge the speaker.
Please check the full manual online for all indication lights.