Electrical Connection - KKT KOLBE WS8501ED Benutzerhandbuch

Installation

Electrical connection

Contact a qualified technician for the electrical connec-
tion of this product.
If installation, maintenance and repair work is
not carried out correctly, hazards may arise for
the user.
The manufacturer shall not be held liable for damage to
persons or property due incorrect installation, or impro-
per, wrong or nonsensical use of the appliance.
The manufacturer shall also not be held liable for acci-
dents (e.g. electrical shock ) caused by lack or interrup-
tion of the earth wire.
Installation, maintenance and repair work are
to be carried out only with the appliance discon-
nected from the electrical mains.
• Before connecting the appliance to the electrical mains,
ensure that the technical data (voltage: V and frequen-
cy: Hz ) in dicated on the data plate concur with those
of the electrical mains.
• If in doubt, contact a qualified technician.
• It is advisable to connect the apliance to the mains with
an electrical plug. This will make technical assistance
easier should it become necessary.
• Make sure that the plug is accessible after inserting
the appliance.
If the electrical outlet is no longer accessible after
insertion, or if a fixed connection is to be made, the ins-
taller must provide a separation device for each pole.
• Valid separation devices include switches with a con-
tact opening of at least 3mm.
• Data required for connection can be found on the data
plate. This information must match the data of the
electrical mains.
• If connection is not made by means of an electrical
plug or the plug is disconnected from the power cable,
a qualified technician will be required to insert and con-
nect the appliance. Contact a qualified technician who
is knowledgeable of local standards and of any additi-
onal regulations issued by the lacal electric company,
and who ensures that work is carried out in compliance
with these standards.
• Important: Check that the appliance is correctly con-
nected to an approved earth wire to ensure electrical
safely. If necessary , have the system checked by a
qualified technician. The manufacturer shall not be held
liable for damage to individuals or property due to lack
or interruption of the earth wire.
Attention: earth connection is required by law.
28
• After assembly, all parts of the appliance must be insu-
lated so that no mishaps may occur during operation.
• The appliance is manufactured for use only after being
properly inserted.
• If the appliance is connected to the mains with an ex-
tension cord, make sure that the extension cord and the
connection are insulated against humidity.
• Never open the covering of the appliance if you come
into contact with wires that carry volatage or if you
modify the electrical and mechanical structure of the
appliance, it is possible that the appliance will malfunc-
tion during operation.
• During the warranty period , repairs may be carried out
by authorised technical service staff. Otherwise, gua-
rantee coverage will be void.
Technical data
Total power:
380-460W
Connection and protection:
AC 220-240V/50 Hz