Werbung
Power
Features
Size
Weight
Note:
Please use the AC adaptor DC/4V 500mA supplied with the unit.
Remove the adaptor when the winder is not in use.
Always turn off the power when inserting or removing watches.
Don´t shake or rotate when winder is stationary.
a. Insert the adaptor into the socket located on the back side oft he product and plug it into the
electrical outlet.
b. Open the front cover using the „PUSH" button and pull out the watch holder using your indes finger
and thumb.
c. Place the watch around the watch holder and lock the watch holder back into place.
d. Turn the ON/OFF switch to ON.
e. Select one of the rotation modes by turning the switch to either A,B,C or D an then the
corresponding cycle will begin.
f.
Close the cover.
Mode A: The winder will rotate clockwise 6 minutes then stop for 30 minutes and then it will repeat
this cycle.
Mode B: The winder will rotate counterclockwise 6 minutes then stop for 30 minutes and then it will
repeat this cycle.
Mode C: The winder will rotate clockwise for 20 minutes the stop for 10 minutes then it will rotate
counterclockwise für 20 minutes then stop for 10 minutes the it will repeat the entire cycle.
Mode D: The winder will rotate clockwise for 10 minutes then counterclockwise for 10 minutes. It
will repeate this cycle for 3 hours continuously and then when it has finished it will stop completely
for 9 hours. Once the 9 hour rest is complete it will repeat this entire cycle.
If you do not use this product for a long time, please take off the adapter.
Always tur off the power when inserting or removing watches.
Item Specification
Input: AC/100-240V
a.Four Rotation
modes:A/B/C/D. Each mode
performs a different winding
sequence
b.Indiviual switch control for
each winder
c.Temperature: Operate
between 5-40°C
230x159x112 mm (WxDxH)
905g
How to use the winder
Attention
Output: DC/4V 50mA
Asessory
AC Adapter
Werbung
