Audica CX series Benutzerhandbuch Seite 8

The diagram below explains the most effective way to connect your subwoofer.
5
200
LINE LEVEL
AV
INPUT
250
R
POWER
100 MODE
60
X-OVER
AUTO
(Hz)
ON
VOLUME 10
180°
5
L/LFE
0
0°
PHASE
AUDICA Ltd, England. Designed and engineered in the EU. Made in the P.R.C.
AUDICA Ltd, Angleterre. Conçu dans I'UE. Fabriqué en P.R.C.
6
1
The Phase Switch (1) changes the phase of
the sub woofer so that it works in phase with
the rest of the speakers in the system. Place
the subwoofer more than 1 metre away from
the front speakers and switch the phase
between 0° and 180°. When the subwoofer
sounds louder and fuller then it is in phase.
Subwoofer Connection and Setup
3 7
HIGH LEVEL INPUT
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WHEN SERVICING, USE ONLY IDENTICAL PARTS
R AVERTISSEMENT: POUR DIMINUER LE RISQUE D'INCENDIE OU DE CHOC
ÉLECTRIQUE, NE PAS EXPOSER CE PRODUIT À LA PLUIE OU À L'HUMIDITÉ.
EN CAS DE RÉPARATION, N'UTILISEZ QUE DES PIÉCES IDENTIQUES.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
L
DOUBLE INSULATION
4
2
If there is no difference in sound between the
two switch positions then the sub is placed in a
flat spot. If this is the case then move the sub
woofer to change the distance between it and
the front speakers. The Power Indicator
LED(2) will shine red when the power is
switched on. When the subwoofer receives a
8
OFF
CX-SUB POWERED
SUBWOOFER
ON
120V 240V
50Hz 60Hz
POWER
FUSE TYPE
150 Watts T 2.5A L/250V
signal from your amplifier it will change to green.
After a period of no signal from your amplifier the
light switches back to red until a further signal is
received. This feature can be overridden by
placing the Power Mode switch (3) in the ON
position.
The Line Level Input-LFE (4) is AUDICA's
preferred AV connection to the amplifier. Using
the cable provided, connect this to the Sub
woofer output on your AV amplifier or DVD
player. Use R and L if your amplifier output is
split left and right. . The Crossover control (5)
changes the pitch at which the subwoofer starts
to work. It is recommended that the crossover
point is set to the 'AV' setting on the dial when
used with the CX System. If you are using the
subwoofer with a non-Audica system then you
can change the crossover point to suit your
system. The Volume Control (6) Increases or
decreases the volume of your subwoofer in
relation to the other speakers in the system.
Start with the volume on 0 on the dial then turn it
up slowly until you can hear it. The subwoofer
should be able to be heard as part of the overall
sound and not overpower the rest of the system.
There is no rule for setting the volume on your
subwoofer so experiment with different music
and films to set it to your tastes. High Level
Inputs (7) can be used as the main input for a
subwoofer when used as part of a stereo setup
or if your amplifier does not have a dedicated
subwoofer output. You can connect it by taking a
signal from one of the front speakers by doubling
up the cables from the output terminal on the
amplifier.