Specifications; Cleaning And Care - Beautural 719NA-0002 Bedienungsanleitung

Connecting Attachment Combs
EN
1. Turn off the grooming clippers and move the blade taper
DE
lever to the "longer cut" position.
FR
2. Hold the attachment comb and snap it onto the bottom
blade, sliding the comb into place.(Fig A.)
ES
3. Make sure the attachment comb is in correct position before
IT
operating the clippers. The blades can be severely damaged
if the attachment comb is not properly attached.
Removing Attachment Combs Combs
1. Turn off the grooming clippers and move the blade taper
lever to the "longer cut" position.
2. Lift the attachment comb away from the blade teeth and
remove it. (Fig.B)

CLEANING AND CARE

• Do not immerse the clippers in water.
• After each use, remove cut hairs from the cutting blades
using the cleaning brush.
• Wipe the clippers using only soft or slightly damp cloths.
Never use solvents or scouring agents.
• The cutting blades can be cleaned with a hygienic spray. Do
not use any other cleaning agents.
-10-
A
B
• For long-lasting cutting performance, it is important to oil
the cutting blades frequently.
• If cutting performance deteriorates after long use despite
regular cleaning and oiling, the cutting blades should be
replaced.
• Use the blade protective cover when the clipper is not in
use.
• Always store the clippers with the protective blade cover in
place.

SPECIFICATIONS

Adapter: Input: 100-240V~56/60Hz 0.68A
Output: 4.2V 2000mA
Use only with a SW-042200A charger
EN
DE
FR
ES
IT
-11-